The Electrical Tool Store - Electrical Wiring Tools, Coax Cable Installation Tools and Phone & Data Wiring Tools
 

Top

Water Heater Overcurrent Protection

November 27, 2005

Q: What is the minimum and maximum breaker size for an electric water heater? What is the minimum wire size for a 4,500 watt, 240 volt single-phase water heater?

A: Let’s calculate the minimum ampacity of the branch circuit conductors first. 422.13 states “Storage-Type Water Heaters. A branch circuit supplying a fixed storage-type water heater that has a capacity of 120 gallons (450 L) or less shall have a rating not less than 125 percent of the nameplate rating of the water heater.” (4,500 divided by 240 x 1.25 = 23.4 amps) This means you must use 10 AWG copper conductors.

The minimum size overcurrent protection for this water heater is 25 amperes. This is the next standard size circuit breaker, according to 240.6. Even though the NEC says this is a standard size, no one stocks this size.

If the water heater nameplate does not list a maximum size overcurrent device, 422.11(E) states “If the overcurrent protection rating is not marked and the appliance is rated over 13.3 amperes, not to exceed 150 percent of the appliance rated current. Where 150 percent of the appliance rating does not correspond to a standard overcurrent device ampere rating, the next higher standard rating shall be permitted.” (4,500 divided by 240 x 1.5 = 28 amperes) The next standard size circuit breaker is 30 amperes, according to 240.6.

 

DIY Electrical Wiring Help from a Master Electrician Do you need assistance with your electrical wiring project? Please visit my DIY Electrical Wiring Help from a Master Electrician page. Where I provide electrical wiring tips, expert electrical advice, answers to your electrical questions and electrical consulting & design services over the phone, via instant messenger or via email.

If you enjoyed this post, make sure you subscribe to my RSS feed or receive updates via email. You can also follow me on Twitter and "LIKE" me on Facebook.

Similar Posts:
Site Sponsor
The Electrical Tool Store - Your online source for electrical wi


Comments

Do you have a question or idea to add to this post? Feel free to post it below. Due to a large backlog and an overwhelming response, it takes approximately 30 days to receive an answer to your electrical question for free. Simply subscribe to this blog (use one of the subscription methods listed in the top right corner of this page) and your answer will be listed in a new blog post in the near future.

To receive an immediate answer (in less than 24 hours) please visit my DIY Electrical Wiring Help from a Master Electrician page.






four + = 11

Bottom