Maintaining Electric Heaters
May 14, 2012
Electric heaters provide an inexpensive way of heating your home but they can also present risks, mainly in the form of fire hazards. For that reason it is essential to give proper maintenance to your heater.
1- How old is your heater?
With the passage of time, electric components can become damaged or dysfunctional, raising the risk of fire associated with electric heaters. In addition, many of the older models do not have safety elements, such as automated turn-off features. These are important as they are designed to prevent overheating, and with it, potential danger.
It is also wise to pay attention to the general condition of the plug and the sockets to which the heather is connected. If they are loose in any way, have them replaced. It is better to be safe than sorry.
It may be worth spending a little more on a model with a digital “smart” regulator that will know when elements within the heater are broken and will shut down accordingly.
2- Storage conditions
When storing portable electric heaters, try to put them back into the box in which they came when you bought them. Close up the box so that no dust, air or water vapour get in and damage the heater. When the winter arrives and you need to use the heater again, ensure that you vacuum it thoroughly. Any dust or debris left on the insides could spark a fire once the heater is plugged in. Also, before plugging you heater back in, and after a period of storage, check the cord and the plug. There should not be any damage to these components. Minor scratches to the cord can be fixed by wrapping it in electrical or insulating tape, but anything more than a scratch is a potential fire hazard, and so the heater must be disposed of. For wall mounted heaters, connected to the mains you will also want to vacuum around any opening to pick up any dust or dead insects that may have worked their way in there.
3- Routine checks and maintenance
As with any other electric heating systems, electric heaters must be routinely inspected to ensure they are safe to operate. If the heater is wall mounted and goes months without use then it is recommended to turn the heater on for short periods of time to make sure it is in good working order. If you want a more thorough inspection, this can be done by hiring the services of a domestic electrical testing company, who can perform checks on all your electrical goods.
4- Keep it clean
Ensuring cleanliness does not only apply to storage periods. While the heater is in use it is wise to regularly check for obstructions to the air flow, such as plants, fabric or paper. There are health reasons for cleaning your heater to as, by circulating warm air, electric heaters can spread allergens or bacteria if they are not clean. Use the vacuum cleaner and lint free cloths for this. Obviously do not use water, as this will damage the heater, but a damp cloth can be used on the outer areas.
Kevin Ball is a blogger and writer. I have recently been concentrating on radiators, storage heaters and electric central heating. You can find me on twitter @KevinBall1982
If you would like to write a guest post for this site, then please visit guidelines and suggestions for guest posts at Ez DIY Electricity.
Do you need assistance with your electrical wiring project? Please visit my DIY Electrical Wiring Help from a Master Electrician page. Where I provide electrical wiring tips, expert electrical advice, answers to your electrical questions and electrical consulting & design services over the phone, via instant messenger or via email.
- Replacing a Heating Element in an Electric Water Heater
- Portable Electric Heaters Recalled by Aloha Housewares Due to Fire Hazard
- Installing a GFCI Receptacle on a Non-Grounded Electrical System, Replacing a Light Switch and Replacing 120 Volt Electric Baseboard Heaters with 240 Volt Heaters
- Q&A About Electric Baseboard Heaters, Quad Receptacles and Installing New Circuits to Bedrooms and a Family Room
- Installing Electric Baseboard Heat