Cable Puller Enables One Person To Pull One Ton
December 1, 2005
December 1, 2005 – Weighing 67 lb, Ultra Tugger® 2-cable, 2,000 lb Puller features 2-speed integral motor and can be folded up and lifted by one person. To set up puller, user attaches telescopic boom and pivoting elbow to conduit using Quick Latch, and adjusts boom angle and length to particular pull. Quick Latch system matches up to threads of any size conduit and holds securely when clamp is tightened using locking knob. Puller requires only 15 A circuit for operation.
Release date: November 1, 2005
Greenlee’s Ultra Tugger® 2: One Person to Pull One Ton with One Puller
ROCKFORD, Ill. November, 2005 -Greenlee’s new 2000-pound Ultra Tugger® 2 cable puller provides the pulling force, speed, and mobility for one person to pull one ton with one puller. The new USA made lightweight UT2 is intended for quick set up and teardown by utilizing Greenlee’s Quick Latch system, and its two-speed hi-torque integral motor is designed specifically for cable pulling applications.
“When it comes to designing tools for the trade, it is the input we receive from electrical contractors that ultimately helps us deliver a product targeted to meet their needs on the jobsite,” said Jim Eisele, Greenlee product manager.
The new UT2 is developed for one person to use. It weights only 67-pounds, has rugged wheels for easy mobility, and can be folded up and lifted by one person, either onto or off of a truck.
To set up the UT2, just attach the telescopic boom and pivoting elbow to the conduit using the Quick Latch, adjust the boom angle and length to the particular pull and the UT2 is ready to go
Advertisement – usually in less than a minute. The UT2 easily attaches to any size conduit 1-inch and larger and there is no need to unscrew or remove the locknut on the conduit and there are no loose parts to contend with.
Greenlee’s patent pending Quick Latch system matches up to the threads of any size conduit and holds securely on the conduit when the clamp is tightened using the large locking knob. There’s no drill to attach. To make a pull, just plug the UT2 into a 15 amp circuit and turn it on.
The UT2’s double capstan provides two different speeds while the integral motor is specifically designed for the pulling application at hand. Gear ratios are also built-in to the UT2 to ensure long-lasting performance and avoid overloading. The hi-speed capstan is for loads 1000-pounds and less. The low-speed capstan is designed for loads of up to 2000-pounds.
The UT2 can readily pull:
o 3 X 500 kcmil cable, 500 feet with two 90° bends
o 3 X 500 kcmil cable, 250 feet with four 90° bends
o 8 X 4/0 AWG, 300 feet with three 90° bends.
For added safety and convenience, an on/off switch and a circuit breaker are located right on the motor and a right angle sheave keeps the user out the direct line when pulling the rope. Greenlee recommends using 5/8-inch polyester multiplex rope with the UT2.
For more information on the Ultra Tugger® 2, or other products from Greenlee, a Textron company, contact Greenlee, 4455 Boeing Drive, Rockford, Illinois 61109-2988. Phone (815) 397-7070. Fax (815) 397-1865 or visit the website at www.greenlee.com.
Textron Inc. is a $10 billion multi-industry company with 44,000 employees in 40 countries. The company leverages its global network of aircraft, industrial and finance businesses to provide customers with innovative solutions and services. Textron is known around the world for its powerful brands such as Bell Helicopter, Cessna Aircraft, Jacobsen, Kautex, Lycoming, E-Z-GO and Greenlee, among others. More information is available at www.textron.com.
Do you need assistance with your electrical wiring project? Please visit my DIY Electrical Wiring Help from a Master Electrician page. Where I provide electrical wiring tips, expert electrical advice, answers to your electrical questions and electrical consulting & design services over the phone, via instant messenger or via email.